00tbanshee Posted May 30, 2006 Report Posted May 30, 2006 I'd say T-5's and If you want a little more Top-end I go with CPI. just my .02 521202[/snapback] took the words out of my mouth Quote
Rebel3190 Posted June 2, 2006 Author Report Posted June 2, 2006 If i go with inframe drag pipes which ones would compliment my mods the most shearer,cpi,grr,ect.... Quote
Justintoxicated Posted June 2, 2006 Report Posted June 2, 2006 (edited) You need to ask your builder what pipes work best with his porting, he is the only person that can really answer your question. Shearers usualy give you a bit more HP on top, and CPI a little less but the power comes on sooner so you have more lowend. Is it still a 350 or is it a stroker? If it is 4mil or more you might ask your builder about regular bore or Big Bore CPI/Shearer... For your purposes listed I personly would go with CPI's (Dune and Drag), then again I have a set on the way! Edited June 2, 2006 by Justintoxicated Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.