Jump to content

Recommended Posts

Posted

i live in toronto canada and have a stock banshee. the carbs have 200 mains in it which seem really rich my plugs are black and covered in carbon i put new ones in and there black within one tank of gas would it be ok to drop the main to a 190/180 any help would be great thanks. chronic :headbang:

Posted

If you have a stock shee, 200 should be fine. What is the ratio of Gas to Oil are you using? Also when you say wet, is this at several throttle positions or a idle? A little rich will not hurt.

 

Chris

Posted

Make sure to take the snorkel off the airbox lid, run your gas at 40:1, and switch to a K&N filter and the 200 mains will be perfect.

 

I always thought the stock jetting was a little rich too, but you really shouldn't be having problems, it may be wise to do a compression test also.

Posted

If it is too rich, it is too rich. Yamaha doesn't put out stock machines that are on the cutting edge of rich/lean for a reason! I would agree w/getting rid of the snorkel, may put you right where you want it. And get yourself a prodesign adapter plate and K+N or other aftermarket "clampable filter" as mentioned before. The stock setup is at best inadequate for filtering dirt.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...