BKOLFO4 Posted April 6, 2006 Report Posted April 6, 2006 Hi, If you have read a couple of my other posts, you may already know, but I bought a used 2003 banshee. I am in the process of rebuilding the motor and I am going to go ahead and rejet the carbs, as the guy I bought from lived at a high altitude, and it runs way to lean for my area. My question: When I took the carbs apart, I noted the needle has 6 positions. I read in the jetting FAQ that the stock needle has 5 positions. Is that true for the 2003? If I do not have a stock needle, is there a way to determine what I have? Thanks! Brian Quote
Wicked98Shee Posted April 6, 2006 Report Posted April 6, 2006 (edited) the stock needle has 5 clip position's ... ur's has 6 .. its most likely a toomey/dynojet needle Edited April 6, 2006 by Wicked98Shee Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.