pro-yamaha Posted November 28, 2005 Report Posted November 28, 2005 I want to build a 100+hp banshee, I would like to go with a cheetah cub set up but would like to stick with a 4mill are 7mil motor. Is it even posable to get A 100+hp out of a 4mil cheetah? I will be drag racing this on AF. What is the best way to do this and what parts will I need? Thanks Quote
01bansheefox Posted November 28, 2005 Report Posted November 28, 2005 http://mccoysperformance.com Quote
enFORCER Posted November 28, 2005 Report Posted November 28, 2005 You can 100+hp out of a 4mill if you spray it.......... Quote
badassbanshee479 Posted November 28, 2005 Report Posted November 28, 2005 guys over on planet sand are making over 100hp with Alky and out of frame drag pipes with 4mills, it can be done. Quote
rocketboy Posted November 28, 2005 Report Posted November 28, 2005 (edited) shit... theres stock stroke alky cubs making 100 hp Edited November 28, 2005 by rocketboy Quote
locogato11283 Posted November 28, 2005 Report Posted November 28, 2005 4mm or 7mm cubs prolly gon be easiest way to go with the 4mm bein the simplest drop in mod. Quote
bkabina Posted November 28, 2005 Report Posted November 28, 2005 (edited) 4mill cubs on gas can hit 100+hp easy.Its everything else that will determine it. Edited November 28, 2005 by bkabina Quote
[email protected] Posted November 28, 2005 Report Posted November 28, 2005 the good ol , i need 100 + thread ......... haahaha not even gunna start Quote
bkabina Posted November 28, 2005 Report Posted November 28, 2005 Then why post anything at all? Quote
bansheefever1 Posted November 28, 2005 Report Posted November 28, 2005 Go big and do a 14mil cub......... Quote
23champ Posted November 28, 2005 Report Posted November 28, 2005 4mil cub would prolly make 100hp on gas with some porting. Quote
Malott 1 Posted November 29, 2005 Report Posted November 29, 2005 Like loco said the 4 mill would be the easiest. I know a couple of guys on planetsand that are tearing the tracks up with their 4mills in stock frames. If your motor is strictly for drag racing then you might want to consider building a bigger motor. From 4 mill up the guys are all running pretty much the same size carbs and the same pipes. The only cost difference is when you get over 4 you will have to have your cases trenched. And to be safe you would probably want to go with a billet crank. From twister they are a little over a grand. I hear alot of guys talking about their 4 mill hot rods cranks breaking. Quote
trex banshee Posted November 29, 2005 Report Posted November 29, 2005 hey FAST 1 did you buy that rigid frame out of grain valley missouri at the sand drags. Quote
Cotton eyed Joe Posted November 29, 2005 Report Posted November 29, 2005 Go big and do a 14mil cub......... 442479[/snapback] How much HP is that good for? 400? Quote
bkabina Posted November 29, 2005 Report Posted November 29, 2005 How much HP is that good for? 400? 442651[/snapback] They are expected to be in the 140's. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.