2004LEBanshee Posted September 12, 2005 Report Posted September 12, 2005 I got the kit from rocky mt. it came with a spring, a ball , and a screw. I took the old one apart and found there is a spring on top of the pivot part, a spring in the hole and im not sure where the ball was because it fell when I took it apart. I assume the ball was in the hole with a spring. But my kicker had a long spring in the hole and a short wider one on top of the pivot part. Question where does the new spring go it seems too short for the hole spring and too big for the top spring.. Oh and do I use the other spring that I'm not replacing? Quote
98bonerSTOCKshee Posted September 12, 2005 Report Posted September 12, 2005 damn should have sent to holyman... do a search he has a how to here somewhere... Quote
2004LEBanshee Posted September 13, 2005 Author Report Posted September 13, 2005 I sent my last one there now the top is gone because it fell apart. Thanks for the in put Quote
wesw Posted September 13, 2005 Report Posted September 13, 2005 http://www.bansheehq.com/forums/index.php?...hl=holyman+tech i did this and opened the hole up so the ball fits in good and cut a spring to fit into it. i also but 2 oring on the shaft, it pushed it together where you dont need a spring on top. i will say after doing this my kicker hasnt ever been this nice not even brand new. mad props to holyman for this tip Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.