macgillivary Posted July 22, 2005 Report Posted July 22, 2005 well i just got myself a dremel kit and im wondering how you polish up your clutch cover with one? im thinkin the wire brush then the polisher but i wanna make sure also what else is there you can polish on a banshee with this do i need anything else thanks Quote
Shee-Male Posted July 22, 2005 Report Posted July 22, 2005 Wet sand down to 400 grit, then polish with a tri-poli compound ( the orange color), then bling, you can polish anything aluminum. Quote
Banshee17Racing Posted July 22, 2005 Report Posted July 22, 2005 When I did mine, I used some Aircraft stripper in an spray can to strip the paint. I really recommend that first. BE VERY CAREFUL what you spray this shit on! It foams up and if you let it sit for 15 minutes, it'll eat through anything. I got it at Farm & Fleet, but I'm sure most hardware stores have it. My little dremel only worked in the small corners, I couldn't imagine doing that for the entire cover. I used a good sized air dremel with some compound for the open spots. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.