njbanshee Posted March 16, 2005 Report Posted March 16, 2005 It all started after i advanced my timing to +5. I guess i didn't tighten one of the bolts all the way and it came loose after a day of riding. I thought i messed up the stator, so i replaced the stator and sent my fly wheel out to be lightened. I just got every thing back and all together. But, I still can't get any spark. Could advancing the timing have messed anything up? If anyone knows any thing i should check please let me know. Quote
PUSH THE THROTTLE Posted March 16, 2005 Report Posted March 16, 2005 I'm guessing your connections aren't tight and check your grounds otherwise make sure you have the key on and the run switch on run. There's no reason why it won't run with the +5. Quote
njbanshee Posted March 17, 2005 Author Report Posted March 17, 2005 Is it possible that one of those black boxes went bad and thats why i don't any spark. Any other ideas would be greatly apreciated. Quote
Rare Scottish Tree Badger Posted March 17, 2005 Report Posted March 17, 2005 Is it possible that one of those black boxes went bad and thats why i don't any spark. Any other ideas would be greatly apreciated. 340794[/snapback] Time to get out the multimeter and do some eliminations. ... All specs are in BHQ's FAQ Electrical. Rare. Quote
J-Madd Posted March 18, 2005 Report Posted March 18, 2005 Pickup coil close enough to the flywheel? Quote
njbanshee Posted March 19, 2005 Author Report Posted March 19, 2005 Pickup coil close enough to the flywheel? 340898[/snapback] The pickup coil was too far away. You just saved me a lot of $. I love this site!!!!!!!!!!!! THANKS Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.