9603banshee Posted March 14, 2005 Report Posted March 14, 2005 Just wondering if anyone has any info on what the stock compression is on a banshee and what is tolerable before rebuilding after loss in compression?? Quote
white trash Posted March 14, 2005 Report Posted March 14, 2005 Pretty sure stock is supposed to be around 120 depending on your elevation. Ive always heard that much below 110-105, or more than 10% difference in the 2 sides is time for a new top end. Im pretty new to the banshee world so this may not be totally acurate Quote
BigRed350x Posted March 14, 2005 Report Posted March 14, 2005 What he said was pretty accurate. There are sites out there that have charts that tell you what compression should be. You could probably ask this question to dlnoss. He will probably be able to tell you. Go to www.nossmachine.com and check around that site, I would imagine it would tell you stock compression somewhere on that site. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.