grounded Posted March 13, 2005 Report Posted March 13, 2005 It will only start in neutral now. Does the clutch sensor need to be shorted? What is the best way ? I'm sure I could figure it out , but I'm stuck at work for the next 6 hours with little to do. later Quote
holeshotkid Posted March 13, 2005 Report Posted March 13, 2005 The wires that went to the sensor in the original clutch perch will need to be connected. Keep in mind when you do this that it will now crank without the clutch being pulled in. I would cut and splice the wires together on the sensor side of the wiring harness and then just plug it in. This way, if you ever wanted to put an original lever back on, all you would have to do is buy a new perch that had the sensor entact. Quote
grounded Posted March 13, 2005 Author Report Posted March 13, 2005 thanks for the quick reply, that seems like it should be pretty quick to get done Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.