williamjernigan Posted February 27, 2005 Report Posted February 27, 2005 I have a 03 banshee with fmf sst's, k&n filter with the snorkel removed and the back 2 inches cut off of the lid. I have 190 mains with 30 pilots and the needle is in the middle position. I noticed that it is started to bog down at 1/4 throttle and it feels almost like it is cutting off. This means that it is to lean right? Should I go move the needle down on the clip so it is 2 from the top? What about my mains? Quote
williamjernigan Posted February 27, 2005 Author Report Posted February 27, 2005 I meant 290 mains not 190 Quote
NEVER SATISFIED Posted March 1, 2005 Report Posted March 1, 2005 (edited) WHATS YOUR ELAVATION Edited March 1, 2005 by NEVER SATISFIED Quote
richybanshee Posted March 1, 2005 Report Posted March 1, 2005 (edited) 1/4 throttle position ... it seems that it is rich on the pilots. When temps get warmer air density changes and less air will go in so the 30 pilot flows more fuel, adjust air screws. Test: take airbox lid off, completely and make a test run. if shee feels better 1/4 throttle, then you must adjust the air screws turning them 1/2 to 1 turn out. Edited March 1, 2005 by richybanshee Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.