Jump to content

Recommended Posts

Posted (edited)

I'm still running the stock caps from '97. :shrugani: I did unscrew the caps, clip the wires back about 1/2" & re-screwed them on to make sure they were getting a good connection once when troubleshooting and electrical headache. :shootself: Never had/heard of any problems with stockers. :unsure:

Edited by ledofthezep
Posted

ran one on my raptor for 2 years, then it went bad and quit working. I cut it open to see the problem, The spring and resistor were good but there is a small brass cup that the spring sit in and it had corrsion or the plastic had just melted into it somehow. It was very thin and I scraped it off with a scribe and it read good after that. I think if you replace the resistor and take a small drill bit to clean the cup at the bottom they will last a long time!!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...