Handle Bars?

[2004LEBanshee]

Ok, I want to get new handle bars, pretty much because of looks. I want bars with a cross bar. I also want either All black or chrome. Can anyone tell me which ones are made to fit a banshee? I dont know anything about these measurements or which ones would fit? Also I want to get a new clutch lever to get rid of all of that crap on the stock one. Which one also, And cheaper the better. Also for the handle bars do I need a clamp or not?

[tats4life]

Any 7/8 in. bar will fit your stock clamps. I've always run a CR-HI bend bar. Any clutch lever will work just don't buy a MSR raptor lever, the suck ballz. I run the factory 909 lever.

 

 

It all depends on how you ride and sit on the bike.

[frocashmoney24]

love my renthal fat bars!, also love my rtc clutch, great customer service.

[theeechozen1]

I run a fly clutch perch witch is pretty cheap, and tag T2's...the tags are the shizznit if you decide to go with a set up without the crossbar. Remember you have to buy a e-brake block off when you swap out the clutch perch. Witch can be had for bout 10 bones....The rentals are a good set of bars for about 75.00 bucks and you can run them with your stock clamp...good luck

[2004LEBanshee]

I was looking at the tag 5 bars I think there called. there 7/8 I believe. Do they come with a pad or not.

[Cotton eyed Joe]

I run TAG-2 1 1/8 CR-LO fat bars with an adapter. No cross bar, and honestly one hell of a good investment.

[azza02shee]

What does the e-brake blockoff consist of?

 

Would it be hard to make one.

[2004LEBanshee]

I just looks like a little oval shaped plate with two holes? There $10 is it worth it to make it ?

[SICK BOY]

I have Renthal cr bend bars,and use a Magnum ez pull clucth lever.And no a e-brake block off plate isn't worth making.I got a billet one with a o ring seal off ebay for $8.00.

[azza02shee]

Thanx guys, point taken

 

Where would we be without ebay?

[boonman]

I run TAG-2 1 1/8 CR-LO fat bars with an adapter. No cross bar, and honestly one hell of a good investment.

What a coinkidink!!! That's what is on my bike too!!!!!!!!! Along with my custom stem!!!!

[02_banshee]

i got banshee renthals blue they shit loads betterthan stockies

[sredish]

I run TAG-2 1 1/8 CR-LO fat bars with an adapter. No cross bar, and honestly one hell of a good investment.

What a coinkidink!!! That's what is on my bike too!!!!!!!!!

me too me too!!

 

 

ooh, didn't notice how old this post was. i feel the gray hairs coming in.

Edited May 11, 2004 by sredish