Problem With A-arms

[XTShee]

I have been meaning to ask about this for a while but keep forgeting about it.

Its probably a simple fix, but I thought I would ask before I spent hours screwing around with my a-arms and getting nowhere

 

I installed new +2+1 a-arms awhile back and I have found that when I turn hard lock to either the left or right the inside wheel of the direction I am turning will lock in place and I cannot bring it back by turning the bars.

Whats happening is the tie rod is getting on the wrong side of itself if that makes any sence.

 

I found that the tab on the frame at the bottom of the steering stem was bent a bit foward so I bashed it back and it fixed the problem a bit, but it can still happen.

 

any ideas on what to do?

 

I am also using +1 offset front rims if that would make any diffrence

[erbilabuc]

only true way to fix it is to gusset the tab. All banshees are succeptible to this problem

[XTShee]

Thought that might be the case, thanks for the reply, I guess I will do some welding tonight.

[BenBB]

Erbilabuc is right on, mine did the same and I had to reinforce it. Just be careful not to make it any wider than stock; not sure what's worse, having the wheels lock and you can't move 'em back or not being able to correct enough in a fast powerslide...