bpreuss Posted February 29, 2004 Report Posted February 29, 2004 check the seal in the water pump. just check your oil. if its way high and milky green thats what it is. take the clutch cover off and the water pump impeller out and replace the seal in the waterpump. Quote
a&sbanshee Posted February 29, 2004 Report Posted February 29, 2004 what kinda head are u running??? if its pushing fluid out the over flow like u say the head gasket might not be blowed but it could be leaking. check to see if u have back pressure on the radiator cap let it run for a few min then twist the cap and see if it has pressure but be careful when doin that lol.. if it does then u most like have a head leaking somewhere u may just have to re torque the head and this will clear it up Quote
frocashmoney24 Posted February 29, 2004 Report Posted February 29, 2004 it could abe normal if u just did a rebuild, after a rebuild take off the radiator cap and let it run for awhile, it'll kick all the air bubbles out and suck the coolent from the resivore like crazy, fill it again and see if it keeps doing it, if it dont it could be that Quote
cmyyard19 Posted March 2, 2004 Report Posted March 2, 2004 thanks for the help everyone, I fixed the problem Quote
boonman Posted March 2, 2004 Report Posted March 2, 2004 thanks for the help everyone, I fixed the problem So, what was the problem? Quote
pimp559 Posted March 2, 2004 Report Posted March 2, 2004 He sent her to AA meetings. Damn Banshaholics. Quote
cmyyard19 Posted March 2, 2004 Report Posted March 2, 2004 After riding all day the center nuts on the head came loose so I just had to torque them back down Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.