+4 Stroker

[banshee tuner]

I am thinking about a plus 4 stroker and I see vito's sells one but it has the stroker spacer plate and if any way possible I would like to run without the spacer plate. Two reasons: the plate gives you another gasket area for a chance to leak and I want this thing to be a sleeper if I have a stroker, jekl an hyde if you know what I mean.

[got1banshee]

I am thinking about a plus 4 stroker and I see vito's sells one but it has the stroker spacer plate and if any way possible I would like to run without the spacer plate. Two reasons: the plate gives you another gasket area for a chance to leak and I want this thing to be a sleeper if I have a stroker, jekl an hyde if you know what I mean.

From my understandings if you dont use the spacer then you have to go get the head or of you runn cool head then you have to get you domes modded. Then if you want to change domes you have to get them modded as well. If you use the spacer you don't have to mod the head or domes in anyway. Just a pain in the ass with out it i think. But its personal preferance.

[fast frankie]

i'm selling a cool head with the modded domes for a +4 stroker make an offer

[chase73]

hey frankie what is the heads compresion set up for is it for race fuel ???? who cut the domes . I am interested in it

[fast frankie]

my compression on a new rebuild was 179 alba cut the domes I ran 94 sunco before I ran my nos but then I switch to race gas so it can be ran on both

[banshee tuner]

So what if you run the +4 and the 5mm long rods is the same spacer plate required or do you have to get a thicker plate.

[PassionRE]

Same plate approx .080". You have to run 795 series Wiseco's with the long rods..Jim

[MRMOONEY]

I ALSO HAVE SOME CUSTOM CUT +4MM DOMES FOR SELL, THEY HAD 190LBS ON MY BIKE WITH A +4MM LONG ROD CRANK AND NO SPACER THERE FOR PRO DESGIN WILL WORK WITH NOSS HEAD I THINK