highroller Posted February 18, 2004 Report Posted February 18, 2004 I have a Magura hydraulic clutch but the damn thing won't install directly like the stock cable. Anyone have any solutions or pictures? Thanks. Quote
mcaf29 Posted February 18, 2004 Report Posted February 18, 2004 Get some washers to hold the slave unit a little further away from the clutch lever. Make sure you leave a little play or the pushrod will bend. Quote
locogato11283 Posted February 18, 2004 Report Posted February 18, 2004 it should go on without a problem. mine went right on and worked perfectly. what do you mean it wont install like the stock cable? on the clutch arem you have to take off the spring. then slip the end of the hydraulic clutch in the arm. then there is a bracket that goes over the top of the slave cylinder that screws into the top of the engine. i never had any problems with mine, if you dont get it let me know and ill get some pictures of my brothers. Quote
DUNEDEMON Posted February 18, 2004 Report Posted February 18, 2004 I personally do not have any experience with the magura hydraulic clutch, but my engine builder doesn not like them because aparently if they are not set up / adjusted correctly they will return too slow. Quote
highroller Posted February 19, 2004 Author Report Posted February 19, 2004 Hey locogato, that'd be cool if you could post some pics, it'd be very helpful. I think I know what you're talking about, I'd just like to see how exactly it looks like. Thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.