Jimbo123 Posted February 11, 2022 Report Share Posted February 11, 2022 Looking at this kit but cant find any info on it. some insight would be greatly apparated as this is my first build. 373cc ASSASSIN Cylinders Banshee TOP + BOTTOM END Vito's 4mm crank 513 pistons Quote Link to comment Share on other sites More sharing options...
fastbanshee8 Posted February 11, 2022 Report Share Posted February 11, 2022 Stay away from rattle can Ray, aka Minkia38. Contact one of the forum sponsors, and buy from them. You'll get your questions answered, good parts, and much better support. Quote Link to comment Share on other sites More sharing options...
Jimbo123 Posted February 12, 2022 Author Report Share Posted February 12, 2022 thanks for the reply will search hear cheers. Quote Link to comment Share on other sites More sharing options...
Keno Posted February 13, 2022 Report Share Posted February 13, 2022 I would stay away from that. Apparently it is a set of Driveline Cylinders that now have steel sleeves pressed into them. Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted February 15, 2022 Report Share Posted February 15, 2022 Were doing cylinders with steel sleeves now. 4mm stroke 64mm starting bore. Sent from my SM-G965U using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Keno Posted February 16, 2022 Report Share Posted February 16, 2022 Were doing cylinders with steel sleeves now. 4mm stroke 64mm starting bore. Sent from my SM-G965U using TapatalkOh, well good to know. Didn't see them on your website. Welp, shouldn't be an issue then. Are they HP or LP? Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted February 19, 2022 Report Share Posted February 19, 2022 Oh, well good to know. Didn't see them on your website. Welp, shouldn't be an issue then. Are they HP or LP?Theyre 192° exhaust port. Kinda an in between'er but low 190's is what we've had good personal experience with. Its been super hard to keep the website updated or even add cylinder kits to it before they're already sold/spoken for with the parts shortages and the extremely long wait time on plating. Partially why we made a sleeve to install in our casting. All the labor of installing, port match, bore and hone is done in house vs sending them to plating at Millennium for almost 3 months.Sent from my SM-G965U using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.