Driveline Clutch Kit

[LukeSandiefer]

Anyone had any luck with these kits? With the 1000cc streetbike plates? Would it just be a drop in kit with all stock components?

[Ayesully810]

Yeah just replace the fibers and steels and install the new springs

 

Sent from my LGMS210 using Tapatalk

[LukeSandiefer]

Yeah just replace the fibers and steels and install the new springs

 

Sent from my LGMS210 using Tapatalk

 

Thanks for the help man, appreciate it 

[Strm Trpr]

My Powerline Performance 350 Dune port has a Driveline Dune Clutch in it.

Installing the motor today, but won't be able to ride it until next weekend.

 

Not sure what kind of power you're putting down, but FWIW, Cam at Redline is putting in one of his Redline Racing Clutches w/heavy duty springs in my +80rwhp Serval.

I asked him if I'd need a lockout for the Serval, and he said, "The Redline Racing clutch w/heavy springs will hold all the power of a Serval no problem, but it will have a heavy clutch pull. If you don't mind a heavy clutch pull, then you'll be good to go."

[RagunCajun]

If you don't like a heavy pull, you can do a sling shot and light springs. That's what I been running for many years.

[LukeSandiefer]

Just ordered the Dune/Trail clutch kit, we'll see how it goes 

[Ayesully810]

If thats what ur problem is that clutch will hold up just fine. No need second guess that

 

Sent from my LGMS210 using Tapatalk

[LukeSandiefer]

If it's not i'm not even mad, just another thing to keep off my mind. Any tips when installing? Soak plates for 24 hours? 

[bigweav81]

I run that exact same clutch set up, and it works great......tell them fuckers you want some stickers too.

 

Sent from my SM-S820L using Tapatalk