Jump to content

Banshee cylinder information thread


RagunCajun

Recommended Posts

Largest cheetah ive heard of was 74 stroke 74.5 bore.

 

I think the 48mm flange is on the 64 stroke cheetah on up but not 100 on that

 

Large dm cc is off in the first post

 

Cp 48 and 53 flanges have orings on them, my twister flanges were smooth requiring pipes to have the orings. So dm and twister pipes dont interchange. Someone else confirm that plz

Link to comment
Share on other sites

Largest cheetah ive heard of was 74 stroke 74.5 bore.

 

I think the 48mm flange is on the 64 stroke cheetah on up but not 100 on that

 

Large dm cc is off in the first post

 

Cp 48 and 53 flanges have orings on them, my twister flanges were smooth requiring pipes to have the orings. So dm and twister pipes dont interchange. Someone else confirm that plz

You wouldn't want to interchange those pipes even if they fit. The tuned length should be different.

 

Sent from my STV100-1 using Tapatalk

Link to comment
Share on other sites

You wouldn't want to interchange those pipes even if they fit. The tuned length should be different.

 

Sent from my STV100-1 using Tapatalk

I will clarify that the distance from the piston to the pipe is not the same on billet vs cast. The tuned length starts at the piston edge. JUSTWANNARACE can probably tell us the different lengths.

 

Sent from my STV100-1 using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...