Rage_kage Posted April 3, 2016 Report Posted April 3, 2016 I just came to the realization that my throttle is to hard to pull(stock housing, extended lever). I'm trying to work up some ideas. Is there a proven throttle assembly that has a easier pull? And if I where to cut my springs in the carb, how much do you normally take off? Quote
sheerider11 Posted April 3, 2016 Report Posted April 3, 2016 HondaHonda throttle and fast ez pull springs. Quote
bluebanshee98 Posted April 3, 2016 Report Posted April 3, 2016 Honda throttle and fast ez pull springs.Which Honda throttle to be exact? Trx450r? 400ex? Trx250r? Was thinking about getting one for my stock bike Quote
Bennett131 Posted April 3, 2016 Report Posted April 3, 2016 Honda throttle is cheap and works well. You can try cutting 1/4 coil from your slide springs. Chariot is nice (you saw mine) Cuervo is going to be decent $$$, I think my chariot was 150 but they can be had for cheaper. Quote
Bennett131 Posted April 3, 2016 Report Posted April 3, 2016 Which Honda throttle to be exact? Trx450r? 400ex? Trx250r? Was thinking about getting one for my stock bikeI think they are all very similar and they should all work the same. I've used a 400ex throttle in the past (at least I think it was a 400 throttle) Quote
sheerider11 Posted April 3, 2016 Report Posted April 3, 2016 Which Honda throttle to be exact? Trx450r? 400ex? Trx250r? Was thinking about getting one for my stock bikeI think mine is a 400 ex. They all are the same I believe. But I heard trx90 was easier. I don't know if that's true though. Sent from my SAMSUNG-SM-G890A using Tapatalk Quote
bluebanshee98 Posted April 3, 2016 Report Posted April 3, 2016 I think they are all very similar and they should all work the same. I've used a 400ex throttle in the past (at least I think it was a 400 throttle)Thanks for clearing that up. To the op I believe FAST sells pre cut springs now check out their website Quote
Bennett131 Posted April 3, 2016 Report Posted April 3, 2016 So is running a 66x58 cubIt just sits in the garage anyways Quote
camp0429 Posted April 3, 2016 Report Posted April 3, 2016 My throttle came off a 250ex. Works great. I think the trx90 lever itself is longer 1 Quote
Craig B Posted April 4, 2016 Report Posted April 4, 2016 I am using a Chariot thumb throttle and Fast ez pull springs for pwk's. Not sure if those spring would work on the stock 26mm. Quote
Rage_kage Posted April 4, 2016 Author Report Posted April 4, 2016 (edited) 2 rides old, lubed after every ride Sent from my XT1585 using Tapatalk Edited April 4, 2016 by Rage_kage Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.