Not Starting

[boarder8135]

So ended up adding timing plate, porting, cool head, domes, and that's about it. Everything on the bike worked amazing before taking it off, and didn't strip or disconnect anything that didn't need to be disconnected (ignition, cdi box, etc)

Getting new spark plugs to see if that helps but don't seem to be getting spark, but cousin accidentally held it while kicking it to see and got a little shock in his hand by accident. We gapped the magnet and everything to different sizes to see if that helps but still nothing. Don't know why we wouldn't get spark now.

 

Maybe it's the stator? But that worked perfect last time I started it. 'Maybe it could be or a wire came loose when installing the timing plate?

 

Any input would be awesome! Thanks!

[BANSHEE HP]

Is the timing mark aligned right?

[boarder8135]

I'll have to check, not really familiar with banshee stuff and learning as I go, but I'll ask my buddy to check that for me

[BANSHEE HP]

Last motor I tore apart was timed at -4°. should still run but it's something you didn't mention.

[boarder8135]

Yeah we tried starting it at +5

[willaduncan]

The timing won't prevent it from sparking

 

 

Sent from my iPhone using Tapatalk

[do-work-son]

So if it shocked him you would think you had spark..how do you know it is spark? Did you change/ check jetting at all after doing all that?

[boarder8135]

New spark plugs and not even getting a spark and pretty much everything like carbs and stuff has been gone through

[Phelps]

Check the pickup gap ?? .018

[boarder8135]

Check the pickup gap ?? .018

Is that normally the spacing?

[Phelps]

yes

[boarder8135]

I guess it ended up being the wiring or the cdi box.  Don't know how that happened since it started perfect last time I rode it. But I appreciate all the help!