Currywitdashotboy Posted April 3, 2015 Report Posted April 3, 2015 Ok my stick won't go in only like halfway, has anyone just wrenched it in the hole before? Quote
Currywitdashotboy Posted April 3, 2015 Author Report Posted April 3, 2015 On the stick they are just on the first notch not sure bout the hole. What's the worst can happen if I use a wrench to try tighten it down? Quote
bigweav81 Posted April 3, 2015 Report Posted April 3, 2015 The worst would be stripping the plastic threads off I'd think Quote
Currywitdashotboy Posted April 3, 2015 Author Report Posted April 3, 2015 Ok I used a wrench fucked the dipstick up real good now...hope I didn't fuck the threads in the clutch cover. Just cleaned the air filter too, I shouldn't of checked the oil lvl till after Easter ffs. Quote
special06shee Posted April 3, 2015 Report Posted April 3, 2015 Should of took a small "v" shape file and cleaned up the thread on the dipstick before completely fucking it up by forcing it. Quote
Currywitdashotboy Posted April 3, 2015 Author Report Posted April 3, 2015 Yeah well I tried to fix the threads with a butter knife but no cigar. Yeah the threads go all over the place now so it's safe to say it's fucked. Where can I buy a new dippy at? An are the threads plastic on the stock dippys? Quote
Currywitdashotboy Posted April 3, 2015 Author Report Posted April 3, 2015 Keep it in ya pants mate. Quote
bluebanshee98 Posted April 4, 2015 Report Posted April 4, 2015 Buy a nice chrome one since you fucked the other one Quote
Deadbeat Posted April 4, 2015 Report Posted April 4, 2015 must of worn that butter knife out rebuilding and jetting your motor lol dumbfuck Quote
Currywitdashotboy Posted April 4, 2015 Author Report Posted April 4, 2015 must of worn that butter knife out rebuilding and jetting your motor lol dumbfuck Kiwi ingenuity at it's finest mate dont hate donate. Quote
wayne_smith97 Posted April 4, 2015 Report Posted April 4, 2015 My donation to the cause is read and research. A billet dipstick is real cheap. Also how can a plastic dipstick screw up case threads Quote
bigweav81 Posted April 4, 2015 Report Posted April 4, 2015 Maybe the side cover was prison shanked with a butter knife as well Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.