cerdmann Posted April 17, 2014 Report Posted April 17, 2014 Hey guys, I bought a 94 Banshee from a guy. I was not overall too worried about this machine when I bought it. I knew that it would take some work to get it running after it sat for 2 or 3 years. My problem is that after replacing the stator, pickup coil, CDI, ignition coil, plug wires, plug caps, and spark plugs I am still not getting any spark. I used the( http://www.dfn.com/agservices/elecfaq.html ) to check all of my electrical connections and found that everything has continuity including kill switch, key switch, wiring harness, etc... Do you guys know of anything else I should look into in order to get spark? Thanks, Cody Sent from my SCH-I545 using Tapatalk Quote
Larry's Shee Posted April 17, 2014 Report Posted April 17, 2014 How do you know replaced parts were bad? Did you use new OEM parts? Quote
03DMshee Posted April 17, 2014 Report Posted April 17, 2014 Look on frame under gas tank shifter side and make sure that if your TORS is gone to have that unplugged Quote
Newcs222 Posted April 19, 2014 Report Posted April 19, 2014 Pull your wiring harness apart and check for bad connections. I has this problem before Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.