xXADRENALINE_JUNKIEXx Posted October 26, 2013 Report Share Posted October 26, 2013 hey guys took my carbs apart and cleaned them now thats its back togather there both gushing fuel out the vents and the back of the carb bells. the bike runs fine no problems with the idle or bogging whiles its doing this. i have stock carbs, tors removed with center needle clip and 270 mains an 25 pilots. just did needle and seats in april along with full carb rebuild. i havent messed with it since but im going to soon im kinda thinking floats are out of adjustment...what do you guys think? PS its done this before but never this bad it usally came out of it. Quote Link to comment Share on other sites More sharing options...
skywalker7374 Posted October 26, 2013 Report Share Posted October 26, 2013 Yeah it sounds like your floats are out of adjustment Quote Link to comment Share on other sites More sharing options...
2strokeshees Posted October 26, 2013 Report Share Posted October 26, 2013 Take it apart, clean again and adjust floats, im assuming you have a manual. Quote Link to comment Share on other sites More sharing options...
xXADRENALINE_JUNKIEXx Posted October 26, 2013 Author Report Share Posted October 26, 2013 yeah i do that where i was leaning to as far as the problem just wanted a second opinon, "my riding buddys here in maine think 2-stokes are a thing of the past, and that 4-stoke technolgy is the was to go LOL, little do they know that you gotta to mix your gas to go fast! thanks man Quote Link to comment Share on other sites More sharing options...
possum Posted October 26, 2013 Report Share Posted October 26, 2013 clean it with toothpaste with qtip in the brass seat where the needle seat seals. 1 Quote Link to comment Share on other sites More sharing options...
xXADRENALINE_JUNKIEXx Posted October 26, 2013 Author Report Share Posted October 26, 2013 Toothpaste? Really? I've never heard of such a technique, why is toothpaste better the carb cleaner? Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted October 26, 2013 Report Share Posted October 26, 2013 Toothpaste is actually a great cleaner/ polisher for many things. It actually has a very mild abrasive in it that will sand/polish as you rub it. Quote Link to comment Share on other sites More sharing options...
xXADRENALINE_JUNKIEXx Posted October 26, 2013 Author Report Share Posted October 26, 2013 Sweet I'll give it a try Quote Link to comment Share on other sites More sharing options...
lil Doobie420 Posted October 30, 2013 Report Share Posted October 30, 2013 ive used this trick too put q tip in a drill and is works better lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.