chilled Posted August 19, 2013 Report Posted August 19, 2013 Anyone have these? http://www.bansheedepot.com/proddetail.asp?prod=22%2D5734&cat=54 Seems to be the right price. Anyone have experience with them? What size is a stock carb? What's the best gain for going bigger? Thank you all Dave Quote
fastbanshee8 Posted August 20, 2013 Report Posted August 20, 2013 Stock carbs are 26mm, and unless you have a huge cc motor, that is way too much carb. They are also round slides, which aren't the best. I've got a stock cylinder 4 mil, and these are what I'm using. They perform better, and are quite a bit cheaper, than the ones you found. http://www.amazon.com/Mikuni-TMX-Flat-Valve-Carb/dp/B000GV2D7G Quote
ginger Posted August 20, 2013 Report Posted August 20, 2013 i have pwk28's on my stock cylinder 4min stroker. smaller carbs help retain to bottom end, when you go to a larger carb, you will loose some bottom end and gain some top. thats why drag guys always run huge carbs. Quote
trickedcarbine Posted August 21, 2013 Report Posted August 21, 2013 Those are junk!!! You can get used 34mm pj's in near new shape for way less. Those in the link are basically a bigger version of the stock carbs. The PJ, PWK, or mikuni TM are all far superior. Quote
Alba Racing Posted November 11, 2013 Report Posted November 11, 2013 Stock carbs work great. Get a tors removal kit and keep the stock carbs. You wont see much if any gains from bigger carbs unless your engine is pretty built. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.