485 jetting

[Slayer213]

I got a 485 pv 27 domes 35mm pwks 42 pilot 155 main cel in the middle elevation 1600 ft boggy on the bottom anyone have any suggestions

[camatv]

buy 38 40 45 50 52

 

and install each one till it feels better. 

[special06shee]

Pilot sounds small to me. Like mentioned above. Try playing with the pilots. If that does mot fix your problem adjust your needle. Just start out rich and work your way down.

[Slayer213]

I had a 48 in it an it was drowning bad with the clip all the way up do u think its a timing issue its +4 now I won't b satisfied till its smooth from bottom to top It's my first 485 sorta new territory for me mid on out its sick fast an sounds perfect

[special06shee]

I know you said those are 27cc domes, but who cut them? A poor dome design can cause bad hesitation as well.

[Slayer213]

I'm pretty sure their trinity domes I got the motor assembled its a fresh rebuild I heard people have problems with trinity domes where do u recommend I get good domes from

[bluebanshee98]

Cam at redline

[special06shee]

I have redline do my motors. I have heard great things about titan racing when it comes to cheetah domes

 

[Slayer213]

Thanks I appreciate ur help