19922002 Posted July 13, 2013 Report Posted July 13, 2013 I can not get my banshee to start. It will not even push start anymore. Reeds are good, its getting spark. I think its getting fuel. When i took reeds out the left cylinder looked really scored but idk if it is that low on compression that it wont start because of that. Quote
Starwriter Posted July 13, 2013 Report Posted July 13, 2013 Do you want me to come over and do a compression test for you? Quote
ECshee Posted July 13, 2013 Report Posted July 13, 2013 (edited) wait fooorr it.......waiiiiiiittt fooorrrrr iiiittt......someone say tear it open! you know you want to! Edited July 13, 2013 by ECshee Quote
tdod101 Posted July 15, 2013 Report Posted July 15, 2013 Sound like you need a new top end...tear into it Quote
Chris327 Posted July 17, 2013 Report Posted July 17, 2013 sounds like you need to take a look into the top end Quote
WINDYCITYJOHN400 Posted July 17, 2013 Report Posted July 17, 2013 Just pull the pipes and look in the exhaust first. Then pull the entire intake set-up and look in there. Then you'll know it's junk and you're 1/2 way to having it pulled out so you can pull the head and make a plan for the full re-build. (Buy a Clymers manual first.) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.