miami350 Posted June 12, 2013 Report Posted June 12, 2013 Im planning on buildin a 7mill stock cylinder and was wondering if there someone that can cut and mill a stock head for a 7mill... lmk Quote
Nightmare Posted June 12, 2013 Report Posted June 12, 2013 I had a stock Cyl 7, fun motor for sure. Contact mull engineering, their a site sponsor. I'm sure they can help or someone will chime in with another idea. <br /><br />Sent from my SGH-T679 using Tapatalk 2<br /><br /> Quote
n2otoofast4u Posted June 12, 2013 Report Posted June 12, 2013 Or use a domed head that appears stock. Quote
Jereme6655 Posted June 12, 2013 Report Posted June 12, 2013 Jeff at FAST Racing (farmandsandtoys.com) can cut your head to where it needs to be. I believe (don't quote) that if you are shipping your head to him, it is roughly $45 Quote
coryv4 Posted June 12, 2013 Report Posted June 12, 2013 why dont you just build a 10 mil wampus? around 100hp and looks stock. Quote
J-Madd Posted June 13, 2013 Report Posted June 13, 2013 Or use a domed head that appears stock. Yea. The CP Industries head. The stock ones are hit and miss when you start cutting them (at least when trying to change the domes to blaster angle). I'd assume they would be hard with changing the squish that much too. Lots of variability in the castings. Quote
trickedcarbine Posted June 13, 2013 Report Posted June 13, 2013 TDR! Just posted this elsewhere. http://www.bansheedepot.com/proddetail.asp?prod=SWH%2D72 Quote
375hp banshees Posted June 14, 2013 Report Posted June 14, 2013 When u get it done (or now) head up n race w/ us http://bansheehq.com/forums/index.php?showtopic=167687 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.