Jereme6655 Posted April 25, 2013 Report Posted April 25, 2013 look....we have all SAID your problem. You just choose not to believe the years of experience we have with these bikes. The banshee has a hard hitting power band to begin with. Mixed with aftermarket pipes, it will break a worn out clutch loose without a problem. When your grabbing the next gear your taking it out of the power and allowing the shitty clutch you have to grab. Then when the bike makes power it slips the clutch again. Put a damn clutch in. THEN report back telling us everything is working good......until them gtfo Quote
Larry's Shee Posted April 25, 2013 Report Posted April 25, 2013 Either the clutch or tires are slipping. Have you checked the trans oil? When was it changed last? Clutch adjustment good? If you can, get going on pavement up to 4th without winding it out , roll along then pin the throttle, if clutch is slipping the engine will wind out but you won't be accelerating. Quote
toytech Posted April 25, 2013 Report Posted April 25, 2013 How come nobody mentioned the possibilty of clutch slipping? I don't know??? you could be on to something. lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.