houghkyle Posted February 19, 2013 Report Posted February 19, 2013 Does anyone know where I can pick up three bolts that hold the radiator cover on? I have an 06 SE banshee and i misplaced the bolts to the radiator cover when i took it off. Cant seem to find them anywhere. Quote
BeeCanBanshee Posted February 19, 2013 Report Posted February 19, 2013 http://alloyboltz.com/catalog/product_info.php?cPath=193_212_213&products_id=1628&osCsid=v8qqptpmfipdgao4jibdad5100 If the link doesn't work go to alloyboltz.com Quote
Finch Posted February 19, 2013 Report Posted February 19, 2013 I got some laying around Sent from my SGH-T999 using Tapatalk 2 Quote
Starwriter Posted February 19, 2013 Report Posted February 19, 2013 Make sure you have the clips that the 2 side ones screw into on the tank cover plastic. You know, the day after the screws from Finch arrive in the mail, you'll look down on the bench and your original screws will be laying right there in the "safe place" where you put them, or you will find them in your jeans pocket when doing laundry. Quote
Jereme6655 Posted February 19, 2013 Report Posted February 19, 2013 this is why the instant I take the cover off I put the nuts, bolts and screws back in the holes they thread into......hasn't let me down yet. and for the times im splitting cases I always go through and put the nut/bolts for the cases in Ziploc bags and write on them with a sharpie what exactly they are.... Quote
oldskool Posted February 20, 2013 Report Posted February 20, 2013 A small tackle box helps me keep some bolts together and other groups of screws/bolts separate, but still all in one place. Quote
spurdy Posted February 20, 2013 Report Posted February 20, 2013 this is why the instant I take the cover off I put the nuts, bolts and screws back in the holes they thread into......hasn't let me down yet. and for the times im splitting cases I always go through and put the nut/bolts for the cases in Ziploc bags and write on them with a sharpie what exactly they are.... Amen to that! Quote
Finch Posted February 20, 2013 Report Posted February 20, 2013 i always find bolts in my pockets that i looked all over for! Quote
2strokeshees Posted February 20, 2013 Report Posted February 20, 2013 Yep there always found bouncing around in the washer tub. Do some searching they will probably pop up. Quote
HolySheet Posted February 21, 2013 Report Posted February 21, 2013 I like to just scatter mine around my garage, and then spend 6 hours putting a top end together cause I can't find anything. Quote
J-Madd Posted February 21, 2013 Report Posted February 21, 2013 I like to just scatter mine around my garage, and then spend 6 hours putting a top end together cause I can't find anything. That's how I prefer it. Especially when you have 3 motors apart in boxes at the same time; and only have enough parts to put 2 of em back together. 1 Quote
wfobasheeboy Posted February 21, 2013 Report Posted February 21, 2013 i always find bolts in my pockets that i looked all over for! Finch you could look around your sofa. They could of fell out of your pocket when you are siting back on your sofa checking out you bike. LOL Quote
sheerider11 Posted February 21, 2013 Report Posted February 21, 2013 That's how I prefer it. Especially when you have 3 motors apart in boxes at the same time; and only have enough parts to put 2 of em back together. weired how that happens. An when you take 1 motor apart there's all these extra nuts and bolts all over that you never even saw Quote
HolySheet Posted February 23, 2013 Report Posted February 23, 2013 weired how that happens. An when you take 1 motor apart there's all these extra nuts and bolts all over that you never even saw Exactly, the one nut and washer I forget every single time(which has been 7 times.). Is the lock nut for the clutch adjustment screw. Then I have to drain all fluids and pull the damn clutch cover again!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.