volvo63' Posted March 19, 2012 Report Posted March 19, 2012 I put up a post yestarday about what size domes that I needed. I think that I worded the question a little unclearly. I am new to banshee's and mine just blew up. It is a stock stroke 350 with t-5s, cool head, +3 timing, 2 into 1 carb, 36mm kehein. I rebuilt it and noticed that it had 180 psi compression! I am either going to run Vp 104 octane or Vp110 octane. I need to know what compression would be the best to run on each of these gases, and what domes would get me this compression at about 400ft elevation. I have no idea of the size of the domes currently in it. Quote
Finch Posted March 19, 2012 Report Posted March 19, 2012 I put up a post yestarday about what size domes that I needed. I think that I worded the question a little unclearly. I am new to banshee's and mine just blew up. It is a stock stroke 350 with t-5s, cool head, +3 timing, 2 into 1 carb, 36mm kehein. I rebuilt it and noticed that it had 180 psi compression! I am either going to run Vp 104 octane or Vp110 octane. I need to know what compression would be the best to run on each of these gases, and what domes would get me this compression at about 400ft elevation. I have no idea of the size of the domes currently in it. it should of said what the size was on the dome. anything above 160 id run 110. and you knwo instead of double posting could of asked this in your current thread Quote
registered user Posted March 20, 2012 Report Posted March 20, 2012 vp site has all the specs for their fuels. however they talk in compression ratio terms and not kicking pressure Quote
volvo63' Posted March 20, 2012 Author Report Posted March 20, 2012 it should of said what the size was on the dome. anything above 160 id run 110. and you knwo instead of double posting could of asked this in your current thread My bad on the double post. I always feel like on forums people just read the first or last post, never whats in the middle. So by asking a second question in the middle everything just gets messed up. Quote
Jereme6655 Posted March 20, 2012 Report Posted March 20, 2012 most guys here read through all the posts......id call a site sponsor like jeff at FAST or Kevin at HJR and ask their opinions. or since this is a busy time of the year for them you could shoot them a pm on here and give it a few days and they will return your message. Quote
mike0chek Posted March 20, 2012 Report Posted March 20, 2012 call kevin or jeff, they will get you setup properly..... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.