boise_banshee Posted September 11, 2011 Report Posted September 11, 2011 (edited) Parting out my Banshee. Majority of the parts were installed Feb. this year. I actually posted on here as I built it up and was done, with pics. Less than ten total rides on everything. The motor has 125 psi comp per cylinder, stock stroke/port and has very low hours on it. (This banshee sat for years in a friends garage before I bought it) Pulls Hard and starts right up. It has only had Klotz Techniplate 40:1 & Flexdrive 30 in it. It has never needed to be opened up beyond clutch side w/ the modds listed below. Since the shee is still complete, for serious buyers I can video text u the motor running that day and prove it with current newspaper right next to it. --04 BANSHEE MOTOR, COMPLETE--- 1800 SHIPPED (Will ship in padded rubbermaid box, strapped shut and then boxed.) FAST Clutch w/light springs FAST New Shift Shaft w/mod FAST Idle Bushing Upgrade Magnum Billet Basket Cascade Pancake Bearing Cascade Modded Shift Star Cascade Polished Stator, Clutch & Water pump Covers New Water Pump Bearing Mull Engineering Pump Billet Gear Chariot Billet Intake Boysen Reed Cages w/ carbon pro petals Prodesign Billet Impeller Prodesign ez-drain Prodesign Cool Head w/22cc domes Prodesign Power Shifter Modquad Billet Kicker & Rebuilt Internals New Kicker Shaft seal Magnetic Oil Plug 1 set of NKG Iridium Plugs (in the box) 1 set NKG Plugs 8RBES (in the box) Also throw in several sealed bottles of Klotz Flex 30 and Techniplate (pay separate shipping) The Frame is a 04 and I had it Powder Coated Royal Blue along with the front and rear hubs. I have Title in hand on the frame. --- 500 SHIPPED ---- (will be high density foam wrapped/clear wrapped and boxed) WOULD LIKE TO SELL THE MOTOR AND FRAME FIRST, THEN I WILL ADD PRICING TO THE PARTS BELOW. GIVE IT AWHILE TO SEE IF THE MOTOR AND FRAME FLY. Also I would like to sell the Longtravel Banshee A-arms set up for yfz shocks, elka shocks, +3 brake lines, line clamps together. Powder Coated Frame and Hubs--Primo Powder Coat Shop Lonestar Chrome Rear Swingarm w/skid plate mount Fullflight long travel cromoly a-arms +3+1 YFZ mount HD Version w/skid plates Elka Suspension Triple Rate Long Travel front shocks with Resivors YFZ Lonestar Chrome Steering Stem w/anti-vibe clamp Gforce rear axle adj from +2-+4 Trailtech Handlebars (high) w/new spider grips Trailtech Headlights ASV Brake and Clutch levers Cascade Chrome Throtle Lever Cascade Chrome Stator/Clutch/Water Pump Covers Cascade Chrome Rear Brake lever Streamline Rear/Front Rotors Chrome gas tank cover w/tank Billet gas cap w/billet vent Braided ss clutch, throtle and brake lines Billet front brake line clamp holders Keihen PWK 28 Carbs with Uni Pod Filters (lots of extra jets too) Chariot Billet Intake w/internal crossover Boysen Reed cages w/ carbon pro series petals Cool Head w/22cc Domes FMF SST Exhaust w/fmf new springs & orings Powercore 2 Silencers w/new packing Modquad Chrome Pipe Hangers Modquad Chrome Front Brake Ress Cap & Ress Modquad Chrome Billet Rear brake Ress Rebuilt Front Brake Calipers, New ebc sintered pads Rebuilt Rear Brake Caliper, Tusk block off, ebc sintered pads Installed new Bearing kit for front hubs Powder Coated Front/Rear hubs Dynatek Cdi Dynatek Ignition Coil Wire Harness all connectors in tact Handlebar on/off light switch assembly PWR Radiator PWR Radiator Hoses Prodesign High Flow Water Pump Impeller Prodesign ez-drain pump plate Prodesign shift lever Mull Engineering Billet Water Pump Gear New water pump bearing F.A.S.T Clutch w/light springs Pancake bearing Modded shift star(fast) Modder shift shaft(fast) New Idle Gear/bushing Billet Clutch Basket Renthal Front & Rear Sproket Renthal Gold Chain TM Design Chain guide/slider kit Chrome Parking Brake Block Off Stainless Bolt kit for entire atv Dual Pingel Fuel Petcock Blue Alum. Anodized Flag Holder New in wrap 6ft whip & flag kit New spyder grips IMS ROLL Foot Pegs SS wheels with like new dirt tires ITP Sandstars on Douglas rims (still have wiskers on them) Carb Sync Tool Drag cut Plastics Banshee stock seat Stock Rear Shock Edited September 11, 2011 by boise_banshee Quote
speedfreek1 Posted September 11, 2011 Report Posted September 11, 2011 how much for sterring stem lonestar ,stator cover, radiator pwr , and shox front also kick start and the dirt tires dual pingel pm me prices may be interested throw in a price for the dynatek cdi complete Quote
Beastydeuce Posted September 11, 2011 Report Posted September 11, 2011 As is said in you other thread, if you do end up parting it out I am very interested in the full flight set- up as i have some yfz shocks and I'm getting ready to purchase the same set that you have. Just want to express my interest in the a-arms and tie rods, because as i said in the other thread, a arm set ups go QUICK around here, Lonny Quote
Buckwheat Posted September 11, 2011 Report Posted September 11, 2011 I'm interested in the shocks and a arms as well. Wheat Quote
boise_banshee Posted September 11, 2011 Author Report Posted September 11, 2011 THIS THREAD IS AN ACCIDENTAL DOUBLE POST.....MODS PLEASE DELETE EVERYONE ELSE PLEASE SEE THE OTHER THREAD ALREADY STARTED, THANK YOU Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.