Fresh motor startup question

[Dicklez]

I started up my quad today for the first time on a fresh topend. Prior to this, the quad was in boxes so I pretty much started from scratch. Once I got some fuel flowing and with the choke it started up sluggishly on one cylinder but once it started running with a little trottle both cylinder were firing. I let it warm up a little and hit the trottle a few times and its great and responsive. But its smokin like a bitch. I dont remember any of my other 2 strokes smokin this bad on start up. Could it be from the oil I used to lube the cylinders with? I might have overdone it a little. I was not able to ride it because I had to go to work. Is this normal on start up? I would appreicate any info.

[wfobasheeboy]

Same for my First fire off. Smoked & then clean out after time. I was thinking it was from the oiled use to put it together. Still running good have 10 to 15 weekend rides on her.

[BrockMoto]

thats pretty standard... unless it persists your good to go

[Larry's Shee]

Congrats on the re-birth . Can't hardly have to much oil on assembly. Don't know what all you've done to it but at least do couple heat cycles and re-torque.

[Dicklez]

Thanks on the info guy's! I started thinkin untill the rings seat it will smoke. I will go over all the head bolts after a couple cycles. Thanks Larry. I'm stoked! When it started it was music to my ears. All that work and it didnt blow up. YET.

[camatv]

it will smoke even after the rings seat. usually prelube makes them smoke like crazy should clear up after a few min's of running

[SheeManWomenHater]

mine smoked too. i got nervous and called my local atv shop that i had rebuild the top end.. they said it's completely normal.. go have some fun!

[lms1977]

You should be fine as long as it goes away. Congrats on getting it running

Let me know when your all done we will have to go ride!!!