coryv4 Posted June 7, 2011 Report Posted June 7, 2011 riding season has alredy started and i need quick advice ok 4mil long rod stock cylinder with mx port or 68mm wampus cylinder serval ported with stock stroke? either way i am gone spend around 1000 dollars i need new cylinders stock one are shot sleeve is cracked so either way i am buying new cylinders trinity told me a redy to run CPI 68mm wompus cylinder with serval port pc pipe and 20cc domes should give me right around 60-70hp with stock stroke they want 1350 for cylinder gaskets pistons head and domes. what would you guys recomend? Quote
CFH87 Posted June 7, 2011 Report Posted June 7, 2011 Serval cub ftw unless your looking for a stock look... Quote
coryv4 Posted June 7, 2011 Author Report Posted June 7, 2011 Serval cub ftw unless your looking for a stock look... i was told the wompus would give a little mor midrange than the cub Quote
okbeast Posted June 7, 2011 Report Posted June 7, 2011 i was told the wompus would give a little mor midrange than the cub The wompus comes in alot of different port layouts I believe. The serval cub will be more duner friendly than a cheetah cub. Quote
coryv4 Posted June 7, 2011 Author Report Posted June 7, 2011 The wompus comes in alot of different port layouts I believe. The serval cub will be more duner friendly than a cheetah cub. well what would be better a serval stock stroke or a 4mil stock cyl mx ported Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.