kamp0ss Posted May 1, 2011 Report Posted May 1, 2011 Alright, just looking to find out how to evaluate my compression. I got a compression tester today and here are my results: Right Carb = 125 psi Left Carb = 140 psi Can someone tell me what this means, good and bad. Thanks! Quote
FullThrottle_06' Posted May 1, 2011 Report Posted May 1, 2011 Good rule of thumb that I have heard is there is suppose to be NO MORE than 5 psi difference between both cylinders.. May want to look into doing a top end rebuild soon. What is your current mods? Quote
kamp0ss Posted May 1, 2011 Author Report Posted May 1, 2011 Good rule of thumb that I have heard is there is suppose to be NO MORE than 5 psi difference between both cylinders.. May want to look into doing a top end rebuild soon. What is your current mods? Pro Circuit Pipes, Vforce 3 reeds, K&N Filter on the way, TORS removal kit, and about to change my timing plate to +4 I really only ride like every other weekend, from May-October, think it can wait til next season? This is not good news lol Quote
kamp0ss Posted May 1, 2011 Author Report Posted May 1, 2011 Good rule of thumb that I have heard is there is suppose to be NO MORE than 5 psi difference between both cylinders.. May want to look into doing a top end rebuild soon. What is your current mods? Sorry, I just redid the compression test again cause that was way too far off, my atv runs great. Both were at 145 psi. Is that high, low or good?! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.