clutch housing

[kwikman]

I have a 2006 banshee low hours on bike. I just got done in stalling a 4mil kit and found the clutch housing is moveing. The housing is moveing on the gear a 1/4 inch were the rivits hold it to the gear. Is this ok

or do I need to replace it with a new one.

[Wildcardracing]

Your basket cushions are worn. How do the fingers of the basket look? Are they getting grooved up? If so, I'd recommend you upgrade to a billet basket with some new urethane cushions. That will solve your problems.

 

-B

[bansheesandrider]

I have a 2006 banshee low hours on bike. I just got done in stalling a 4mil kit and found the clutch housing is moveing. The housing is moveing on the gear a 1/4 inch were the rivits hold it to the gear. Is this ok

or do I need to replace it with a new one.

1/4 inch is way too much play in your clutch basket, the stock basket is not repairable so you need to get an aftermarket basket and install your gear on it.

[acroadam]

I thought there was no cushions needed