Jump to content

Recommended Posts

Posted

I was thinking about getting the trinity 2 into 1 carb kit what's everyones thoughts on this kit or should I just stick with the dual carb setup I'm looking for a little more bottom end will this help?

Posted

I would stick with the dual carb setup if I were you, I see no advantage to having a 2 into one other than ease of tuning and thats even a weak excuse. Some claim better low end torque and throttle response but although I dont have a dyno I have a very hard time believing its any better than a properly matched set of duals of the correct size, and you get to keep your top end.

Posted

A single will get you a little more power right off the bottom, but it will cap the top end quite a bit. You wont notice the increase in low end power, but you will notice the increased acceleration speed. I used to run the 2 into 1, and I have quite a few bikes I built running it. However, I recommend dual carbs. My dyno test showed the dual carbs having 4.75hp more on the top end than the single. On the bottom, the difference was only 1.56hp with the single being the one that had more.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...