tonyown Posted May 9, 2010 Report Posted May 9, 2010 Made a quick search as usual I didn't find anything lol here's question can you cut and extend the stock swing arm +4... will it be safe... what about shock mount? I know a lot of great profesional welder... going to school soon so trying to save some money I know it'd be better to buy a real +4... If anyone have a link to a thread or answer it'd be apreciated! Quote
ban99 Posted May 9, 2010 Report Posted May 9, 2010 I've done it several times. Not hard, just use some 1/4"x4" flat plate to extend it then gusset the top and bottom. Make sure you cut behind the shock mount. Sorry i don't have any pics of one. hope this helps. Quote
tonyown Posted May 9, 2010 Author Report Posted May 9, 2010 you dont change the shock mount location for +4? Was it solid? ty for answer Quote
ban99 Posted May 9, 2010 Report Posted May 9, 2010 you dont change the shock mount location for +4? Was it solid? ty for answer It was plenty strong. You will depending on your weight need to adjust the compression on your shock. Quote
BKCBANSHEE04 Posted July 14, 2010 Report Posted July 14, 2010 i did my banshee and my wifes blaster both +4, i jump and ride them pretty hard, im a welder fabricator i will post some pics just make sure you have a good welder its alot ridin on it Quote
AKheathen Posted July 15, 2010 Report Posted July 15, 2010 hmm, i cracked the shit out of my stocker as it is......it's just gonna be better for me to spend the $20 on a pivot tube, then fab the rest. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.