camorider Posted February 2, 2010 Report Posted February 2, 2010 My banshee runs good at an idle and revs up fine. When I put it in gear it bogs alot and eventually stalls out. I can get it out of first for only a short time before it bogs down. While in gear I hold the throttle in one spot and it revs up and down until it dies. I recently replaced all the gaskets, cleaned out the carbs, the bike is leak free and super clean. I haven't messed with my timing at all. Carbs are synched. What the hell could it be? Quote
wacko2000 Posted February 2, 2010 Report Posted February 2, 2010 is the TORS still hooked up? Do you have the little crossover tube on the carbs? are you sure the slides are in the correct carb? Quote
camorider Posted February 2, 2010 Author Report Posted February 2, 2010 is the TORS still hooked up? Do you have the little crossover tube on the carbs? are you sure the slides are in the correct carb? I have the TORS eliminator kit, the crossover tube is hooked up, and the slides are right. Is there any other reason for it to act like that? Is the problem most likely the carbs? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.