Mikuni TM 28's

[broncbob]

Has any one run these on a banshee?

[AKheathen]

umm....yah, lots...........what's your question on them?

[broncbob]

What Size intake boots and filters do I need.

 

What is a good range of jets to have on hand for tuning at around 5000', as well what needles are a good idea to have on hand. This would be on a quad that has a cool head 19CC domes, +4 timing and T5's

 

Is it normal to have one carb set up with a choke lever, and one with a choke knob?

[AKheathen]

well, you can get away with stock boots and filters, but it's a little tight on the filters. i believe the size is 28-30, just specify your carbs when you are buying them. it is normall to have a knob and a lever, since the lever is hard to reach on the right. i take it you are running pods, so i would suggest 290-360 mains

[broncbob]

I plan on trying Mull's filter set up on them. The rubber connection hose on it mic's out to 44-45MM on the ID. I found out that the air bell on the TM 28's should be 44MM.