wadlesw96 Posted December 31, 2009 Report Posted December 31, 2009 Ok my shee seems to be pretty sensitive to loading up, is this normal? and when it loads up does it cause one cylinder to not run right? this happened to me twice today. can anyone tell me whats going on? thanks Quote
LiftdT4R Posted December 31, 2009 Report Posted December 31, 2009 Definately not normal. If I had to take a guess I would say your jetting is too rich or the carbs may need to be cleaned. If you post up your mods in the jetting section, along with what jetting your running now somebody should be able to get you close. Also, what plugs are you running? The wrong plugs may also do that. Most people run NGKs in BR8ES or B8ES. Quote
Idontknowwhy Posted January 2, 2010 Report Posted January 2, 2010 (edited) oops wrong thread my bad Edited January 2, 2010 by Idontknowwhy Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.