Jump to content

Recommended Posts

Posted

My banshee is pouring gas out the rear overflow hoses of the carbs. This happens when I turn the fuel on. I didn't start it . I just replaced the throttle cable, carb hoses, and gas tank. Don't know if it's got an air pocket in there or what. I installed everything as it was before. Any advice? :notworthy:

Posted

Pull the carb bowls and clean the bottom of the carb. Make sure that the floats are working. Reinstall everything and if it is still doing it then you will need to adjust your float hight. And if that doesnt work then your in for a rebuild kit. Or just float needles.

Posted

Pull the carb bowls and clean the bottom of the carb. Make sure that the floats are working. Reinstall everything and if it is still doing it then you will need to adjust your float hight. And if that doesnt work then your in for a rebuild kit. Or just float needles.

 

 

X2 on that. If adjusting your float does not work you might have to replace the float needle.

Posted

before you pull anything apart, just tap the bowl with the handle of a screwdriver or a small extension. A lot of times the float is just stuck and this will free it and fix the problem. If it persists then pull the bowl and clean it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...