shee23 Posted April 24, 2009 Report Posted April 24, 2009 the compression is at 100 in both cylinders. wat should i do??? Quote
SAVAGE420 Posted April 24, 2009 Report Posted April 24, 2009 (edited) the compression is at 100 in both cylinders. what should i do??? KICK. :laugh: Check fuel flow, check if there's spark and you say you have 100psi, that is getting kinda on the low side but should fire right up if your getting a good spark and fuel to the motor. All you need is spark, fuel and compression and it will go. If its jetted right i might add too. I ran my motor real tired on the stock pistons a few years ago and it had 85-90 psi and it still ran like a champ until i rebuilt it. Good luck :thumbsup: Edited April 24, 2009 by savage420 Quote
shee23 Posted April 24, 2009 Author Report Posted April 24, 2009 KICK. :laugh: Check fuel flow, check if there's spark and you say you have 100psi, that is getting kinda on the low side but should fire right up if your getting a good spark and fuel to the motor. All you need is spark, fuel and compression and it will go. If its jetted right i might add too. I ran my motor real tired on the stock pistons a few years ago and it had 85-90 psi and it still ran like a champ until i rebuilt it. Good luck :thumbsup: yeah i have tried everything!!i think i need to test the stator and cdi Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.