yammyboy3 Posted March 24, 2009 Report Posted March 24, 2009 mods will be 4 mill wiseco crank 115 rods 66m bore port done bye me noss head 19cc domes pro circuit platinums k&n with adaptor lid removed needle on 3rd clip down sea level 50/50 gas with castor 927 i hope someone can help and put me in the ball park of what jets im going to need so i can get the right kit also who do yous use for ket kits dyno jet ? Quote
BUILDER Posted March 24, 2009 Report Posted March 24, 2009 mods will be 4 mill wiseco crank 115 rods 66m bore port done bye me noss head 19cc domes pro circuit platinums k&n with adaptor lid removed needle on 3rd clip down sea level 50/50 gas with castor 927 i hope someone can help and put me in the ball park of what jets im going to need so i can get the right kit also who do yous use for ket kits dyno jet ? What carbs? Hard to tell you what jets to get if we dont know what carbs you will be buying them for. Quote
yammyboy3 Posted March 24, 2009 Author Report Posted March 24, 2009 stockers :-/ do you think i should upgrade if so to what and what all is involved with doing it Quote
Building my First Posted March 25, 2009 Report Posted March 25, 2009 I'm building the same engine damn near. Waiting for the cylinders to get back from porting. My port guy is telling me the main is going to be somewhwere around 350-360, I don't know about a long rod stroker though. You could run some 30mm PWK's for sure. I don't think the Pro Circuits could take much more, you need some CPI inframes. Buy two pairs, I'll take a set too! 2000 Banshee Full Range Port by Hi-Tech Horsepower Wiseco Pro Lites .010 over Stock 54mm stroke Cool Head w/ 19cc domes Pro Design Impeller Pro Design Adj. Timing Plate +3 Pro Circuit Platinum Exhaust Durablue +2 Shift Star Mod Tors Eliminated Parking Brake Eliminated Works Dual Rate up front Maxxis RAZR's all around Changes for 2010 CPI Inframes 35mm PWK's Aftermarket A-Arms All the billet & carbon fiber shit I can get my hands on Quote
Building my First Posted March 25, 2009 Report Posted March 25, 2009 How much port are you doing? Just cleaning things up or opening the tranfers and exhaust? Quote
yammyboy3 Posted March 25, 2009 Author Report Posted March 25, 2009 How much port are you doing? Just cleaning things up or opening the tranfers and exhaust? im going to open the top exhaust 2cm lower the intake 1.5 - 2.0 and raise the transfers 2 cms and clean out my tunnels how much do cpi inframes cost ?? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.