MikeNick Posted March 23, 2009 Report Posted March 23, 2009 I no I will probably have to get a picture to describe this but here goes..Where my motor bolts to the rear of the frame, there is one metal spacer plate on one side of the actual motor mount and I need to know if there should be one for each side or not. I couldn't find the piece I was looking for in the motor teardown section of the manual or on a Yamaha parts fiche. I thought what I needed was #5 on this list but now I' thinkin no...I'm fuckin lost..Someone who has takin one of these out and put it back together b4 help me!!!!!!!!!!!!! http://www.powerpartsplus.com/pages/parts/...d/2/Yamaha.aspx Quote
MikeNick Posted March 23, 2009 Author Report Posted March 23, 2009 Here's what i'm talkin about of page 129..The damper spacer that has "UP" on a portion of it..Do I need to of these or only one.?? http://books.google.com/books?id=SlL970Dgj...1&ct=result Quote
AKheathen Posted March 23, 2009 Report Posted March 23, 2009 one on the front mount, and one on the rear mount. so basically, only one for the rear mount Quote
MikeNick Posted March 23, 2009 Author Report Posted March 23, 2009 one on the front mount, and one on the rear mount. so basically, only one for the rear mount Thanks man... Quote
MikeNick Posted March 23, 2009 Author Report Posted March 23, 2009 Anyone have a damper spacer for the motor mount..If so I will buy it from you...Lemme know!! Quote
sleeper06 Posted March 23, 2009 Report Posted March 23, 2009 I like to run 4 for vibration purposes or at least two in front Quote
LS1Inferno Posted March 23, 2009 Report Posted March 23, 2009 i cut mine out of some thing bicycle tire. Quote
MikeNick Posted March 23, 2009 Author Report Posted March 23, 2009 i cut mine out of some thing bicycle tire. So you traced them out on a bicycle tire then cut them out of that??? I may just buy some but the little fuckers are like $9 bucks a piece, or thats the cheapest I have found them...blahhh..This sucks Quote
J-Madd Posted March 24, 2009 Report Posted March 24, 2009 I don't think I have any on the front on any of my motors. Quote
locogato11283 Posted March 24, 2009 Report Posted March 24, 2009 only have one on the front and one on the rear. Quote
MikeNick Posted March 24, 2009 Author Report Posted March 24, 2009 Well I took a piece of rubber mat that was the same thickness as the one spacer I had and traced/cut them out of that and used one on every corner, maybe that will cut down on some vibration.. Quote
AKheathen Posted March 24, 2009 Report Posted March 24, 2009 Well I took a piece of rubber mat that was the same thickness as the one spacer I had and traced/cut them out of that and used one on every corner, maybe that will cut down on some vibration.. lemmie know how that works out. Quote
MikeNick Posted March 24, 2009 Author Report Posted March 24, 2009 lemmie know how that works out. Will do buddy... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.