sangheraent Posted February 21, 2009 Report Posted February 21, 2009 well here are my issues. After sitting for a month or so I started her up today. when I put her away in november I was in search for a new carb because one of them was messed up. well i changed the carb and was ready to go. but I still have some problems. first thing it doesnt idle unless I give a little gas. Right cyliner just smokes like a mother when throttled left smokes to but no where near as much It wont powerband until about 3rd gear feels like I have 65-70% of the power I normally have when kicking it will only start when I have the throttle 3/4 of the way pushed in. Right pipe makes kind of a wierd sound when cruisin around Quote
sleeper06 Posted February 21, 2009 Report Posted February 21, 2009 Is the problem side same that u changed carb on? Try swapping plug wires see if problem travels to other side,did u resync your carbs and how does your slide heights look at idle(same or not).Check reed on that side Quote
AKheathen Posted February 21, 2009 Report Posted February 21, 2009 well here are my issues. After sitting for a month or so I started her up today. when I put her away in november I was in search for a new carb because one of them was messed up. well i changed the carb and was ready to go. but I still have some problems. first thing it doesnt idle unless I give a little gas. Right cyliner just smokes like a mother when throttled left smokes to but no where near as much It wont powerband until about 3rd gear feels like I have 65-70% of the power I normally have when kicking it will only start when I have the throttle 3/4 of the way pushed in. Right pipe makes kind of a wierd sound when cruisin around which carb did you change? what kind of smoke is coming out? check the choke tube between the carbs, and make sure the slides are in right Quote
sangheraent Posted February 21, 2009 Author Report Posted February 21, 2009 which carb did you change? what kind of smoke is coming out? check the choke tube between the carbs, and make sure the slides are in right well the problem side is the new carb side. I will check the slide height tomorrow. I will also swap plug wires and maybe even the plugs themselves. thanks for the help I will update more tomorrow Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.