Pyrojunky619 Posted December 29, 2008 Report Posted December 29, 2008 Anyone know the easiest way to get the old ones out of a stock carrier? Also anyone got any info on the grease zerk mod or the stock carrier ? Quote
BlasterKX Posted December 29, 2008 Report Posted December 29, 2008 Anyone know the easiest way to get the old ones out of a stock carrier? Also anyone got any info on the grease zerk mod or the stock carrier ? easiest way i know is press em out or a chizzel and hammer or dremel. and my carrier has a grease zerk Quote
BUILDER Posted December 29, 2008 Report Posted December 29, 2008 Anyone know the easiest way to get the old ones out of a stock carrier? Also anyone got any info on the grease zerk mod or the stock carrier ? A punch and a hammer usually work well to take the bearings out. To put the grease zerk in you need to take the inside seal out of the new bearings when you put them in the carrier also you need to drill a hole some were in the middle of the carrier it is up to you were you want it then tap the hole for a grease zerk and just screw one in it. Quote
Michael Jackson Posted December 29, 2008 Report Posted December 29, 2008 ive always used the handle of my floor jack and a shot filled rubber mallet, works great Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.