Problem?

[jrod]

Ok so i sold my last banshee last night. I put everything all back together will the stock parts and it would not start. I spray some starting fluid in it, bam Fired right off but would only run at WOT. I figured Jetting right. Plus it is alot colder hear now than last time i rode the bike. It would run great at WOT! Now the guy who got the bike cant get it running. I am feeling bad about it, and turned to you guys for some help. There is nothing else i can think of?

[98_shee]

did you put the balance tube between the carbs in? (The black one) Or you could have a jetting issue maybe one is cloged up?

[Paddleboy]

so it is completly stock now? if so you should have 25 pilot and prolly a 200 main with needle in middle clip. if everything checks out (carbs clean, synced, filter clean, good plugs) and it still wont run first check the gas might have to drain and put new gas in. if it is colder up the main 2 sizes. try that out and see how it goes

[jrod]

so it is completly stock now? if so you should have 25 pilot and prolly a 200 main with needle in middle clip. if everything checks out (carbs clean, synced, filter clean, good plugs) and it still wont run first check the gas might have to drain and put new gas in. if it is colder up the main 2 sizes. try that out and see how it goes

 

 

IT has the balance tube.

 

The mods are TR6, Timing Plate, Vforce 3 reeds, K&N box filter. What i call stock.LOL Alot more stock than what it once was.