BansheeBanditBrian

Great, thanks guys.

Do you have to have your motor at operating temperature to perform a leak down test ? How about the compression test does the motor have to be at operating temperature?

I just freshened up my top end also... it was right before I joined BANSHEEHQ. so I ran my first quarter tank 20 to 1. I let it warm up while i check for leaks. Took it for spin. Then I let it cool down. drained the fuel retorque head. Ran a normal tank of gas 32 to 1. Finally then change the oil or tyranny fluid.

Anybody ride rampart range? Anybody live in colorado? If so let's RIDE.

Cool! How much $ is that engine going to run you? If you don't mind me asking.?

Yeah, i bought a rear set of mud lites. I went from 90 percent tire spin to 0 percent, it was hard to steer. The rear tires just kept pushing... Then i bought a set for the front. It made all the difference in handling and cornering. I would recommend them but you got to buy all 4. Oh, they're a little soft for hard trail riding. They are already showing a little wear but still worth it.

I bought a cheap one off of ebay, hour meter and tachometer. $25 delivered, no problems.

Wow, cool! I wish I knew about that a year ago... thanks

How do you add a grease fitting?

Do You have stock intakes Like me?

That sounds good. I am going to do a leak down test before and after the install. Thanks

Cool thanks, do you still cut the tabs even if you install risers?

Thanks for the heads up I'm just about ready to start that project.

Trim the intakes? With a razor where?

Thanks guys!!

I'm about 150 compression with the stock head. What cc is the stock head?

I recentley bored out .20 over stock and bought a noss head, fmf sst exhaust, everything else is pretty much stock. I ride at a couple different places any where from 6,000 to 8,000 feet above sea level. What size domes should i buy? I guess my question is what's the difference between 17cc and 21cc? Thanks

Is that 4 tires and rims or just the 2?

Hey I'll give you $170 for the v force 3 cages and reeds complete and the steering stem? Thanks

Will you post a picture for the tie rods? What kind of condition are they in? THANKS

Paypal sent for noss head and pods, Thanks!!!

Hey, what's the bottom of the skid plate look like?

hey, is your billet kicker still available?