SuperMex

I need to replace my plug wires what wires can I use from local auto parts store? i.e. brand, size, etc... thanks

Having ran T-5s and now I have R-2s I would highly recommend R-2s they come on sooner than the T-5s and hit way harder in the mid and then rev out forever you will be very pleased imo plus they look way way better than any pipe out there and sound awesome

I completely removed the stock cable from master cylinder to caliper bolted up new +2 cable, filled my master cylinder, pumped brakes, cracked open bleeder valve, pumped, cracked, etc etc until all air was removed and I had pressure just be sure to keep an eye on your master cylinder and don't let it get to low and start from your caliper farthest away from your master cylinder which is your left wheel unless yours is modified its tedious but can be done in 10 minutes or so if you have someone helping you to pump brake handle while you bleed them off

I just put +2 arms on and new lines I just used shop towels while I disconnected them and drained them off then installed new ones the same way it worked for me

Your going to love these pipes

I have searched this and read sooo many different setups. Can someone please tell me if there is a easy way to change my stock plug wires and what wires/plug boots I can use part numbers and where to buy wiould be very helpful. Not sure why but my left side plug wire is too short and comes loose while i ride I think the previous owner cut it back and its just to short. Any help would be much appreciated.

Do I know you? Hahahah

I agree, did you feel like the R-2s pulled a lil harder mid thru top and rev out a lil longer ?

Why are you selling them? these pipes are the shit, better all around pipe than CPIs in my opinion.

Racing also has a lot to do with rider ability but no kock against CPIs there a great pipe also

I have ran both the CPI and R-2s and I have R-2s on my bike the R-2 will come on just as early as CPIs but will rev out longer and personally I think they look better.

Why didn't I think about that duhhhh hahahaha

I'm doing a Serval build soon but I'm using R-2s instead of the other popular pipe choices I tested a set of my buddies CPIs versus my R-2 on my bike and the R-2s come on just as soon as CPIs but rev out longer just my 2cents something to think about and its nice to have something different then the rest of the pack

First thing I checked was my steering stop on frame its fine and its the stock rims so ill put my razors on today and see if I have problems with those as well. Oh and its not toed in at all I think its just the offset of the stock rims.

So just put on a set of +2 Roll Design A-Arms and noticed my rims hit when I turn to sharp is the fix just to flip the rims so there offset ?

FMF's over R-2's? You must be joking....

I have the option of a Rudy Kurtz 4mil or a Serval 4mil. I am leaning towards going with Rudy again but I have been hearing good tihings about these Servals and right now its decision time. Rudys motors run as hard as you can get and the Servals have that smooth powerband just wondering what you guys would go with?

HJR is about a 45 minute drive from me but I think I'm going to see if another builder I know can do some magic on them.

No its not but the 4mil Serval is the motor I'm going with just need to find someone local to do the porting I guess. Trinity is two blocks from me but I wouldn't let them wash my bike let alone port it.

Looking to buy Serval soon I know transfer cases need to be ported to match, how much will i lose if I dont port them to match intake ports on the Serval? Andy at M&M says not really a big deal but i'm a lil skeptical.

2008 Chevy Silverado ExCab 4x4 LTZ package W/6.0L only has 32,000 miles. Parting out or will trade for banshee parts? Motors, Carbs, Subframes, Swingarms, etc what do you have to trade or make offers sorry no shipping don't have time for that but will meet up in So Cal if your interested in anything or need pics email xvargasx@gmail

-ery interested in that motor I live in Rancho Cucamonga so I can come pick it up give me a call 909-816-5966 Chuy

Painted them already sorry, yellow is just not my thing

Sold my T-5's, Painting plastics, frame and everything else to powdercoat.